solar regulator

MISOL 60A MPPT solar regulator 12V24V36V48V auto work, MPPT solar charge controller
  • Model: SCC-ET6415-1
  • Shipping Weight: 8kg
  • Units in Stock: 2
  • Manufactured by: MISOL

Sale: $319.89
Save: 20% off

Add to Cart:
Payments by PayPal


This listing includes 1 unit of MPPT solar regulator 60A.(TRUE MPPT)

( Manual in English)


Key Features:


l  Rated continuous charging current60A

l  Max.PV input power3120W

l  LCD display

l  Communication connection to PC (monitor by PC)

l  Ethernet Connection (monitor controller remotely by network.)

l  Can BUS port

l  12V/24V/36V/48V system voltage auto work (remark: every time start up the controller, system voltage automatically identified, do not need your any operation or setting)



1 – Heat Sink

Inductance and MOSFET of heat through aluminum heat sinkto dissipate.

2 – LCD

Data of displaying interface.

3 – Battery Indicator

An LED indicator shows battery status.

4 – Charging Indicator

An LED indicator shows charging or not.

5 – Faults Indicator

An LED indicator shows controller faults.

6 – Buttons

Browse or modify all parameters.



7 – Serial RS-232 Port (DB9)

Monitor controller by PC or update software.

8 – Ethernet Port (RJ45)

Connect Ethernet, monitor controller remotely by network.

9 – Solar polarity reversed Indicator

An LED indicator shows solar modules positive and negative reversed.

10 – Remote Temperature Sensor Port (MC1.5.3.81-2L)

Connect RTS, Measure battery temperature to make temperature compensation.

11 – Remote Battery Voltage Sense Port (MC1.5.3.81-2L)

Connect RBVS, Measure battery voltage accurately.

12 – CAN BUS Port (MC1.5.3.81-4L)

Communicate with our other CAN BUS devices.

13 – Solar Positive Terminal (red)

Connect to solar module(s) positive (+) terminal.

14 – Solar Negative Terminal (black)

Connect to solar module(s) negative (-) terminal.

15 – Battery Negative Terminal (black)

Connect to battery negative (-) terminal.

16 – Battery Positive Terminal (red)

Connect to battery positive (+) terminal.




Data Comparison between MPPT and traditional solar regulator as below:


Technical Parameter:
Nominal System Voltage: 12V/24V/36V/48V auto
Nominal Battery Current: 60A
Maximum Solar Input Voltage:150VDC
Battery Voltage Range: 8-72VDC
Maximum Input Power: 12V:800W, 24V:1600W, 36V:2400W, 48V:3200W
Voltage Accuracy:12V / 24V:  less than 0.1% +/-50mV;   36V / 48V: less than 0.1% +/-100mV
Self Consumption:1.3 to 1.5W
Transient Surge Protection:4500W/port
Grounding: Solar or Battery Negative Terminal
Ethernet Port: RJ45
Serial RS-232 Port: DB9, male connector
Temp. Compensated Setpoints: Equalize, Boost, Float, LVD
Overall size:(Length*width*height): 285mm*203mm*121mm
Mounting (Length*width): 200mm*193mm
Weight: around 5kg
Terminal: 35mm2
Mounting hole: diameter 10(M8)
Ambient Temp. Range : -25 to  +55
Storage Temp. Range : -30  to  +85
Humidity range : 0 to 95 degree N.C
Altitude Range : less than 3000 m
Enclosure         :IP20





Charging over current disconnect

Charging over current reconnect

Solar short circuit disconnect

Solar short circuit reconnect

Solar polarity reversed protect

Battery polarity reversed protect

Battery high voltage disconnect

Battery high voltage reconnect

High temperature disconnect

High temperature reconnect


Current Reviews: : total 0 reviews

This product was added to our catalog on Thursday 19 December, 2013.

Cell Phone Jammer,Phone Jammer,Cell Phone Jammer for Sale,Cell Phone Blocker,Signal Blocker,Mobile Phone Jammer,Cell Phone Signal Jammer